استاندارد ماشین های الکتریکی دوار: 1-3772
استاندارد ماشین های الکتریکی دوار نخستین بار در سال 1375 تدوین شد. این استاندارد بر اساس پیشنهادهای رسیده و بررسی توسط سازمان استاندارد و تحقیقات صنعتی ایران و تایید کمیسیون های مربوط برای سومین بار مورد تجدید نظر قرار گرفت.
استاندارد ماشین های الکتریکی دوار نخستین بار در سال 1375 تدوین شد. این استاندارد بر اساس پیشنهادهای رسیده و بررسی توسط سازمان استاندارد و تحقیقات صنعتی ایران و تایید کمیسیون های مربوط برای سومین بار مورد تجدید نظر قرار گرفت.
استانداردهای بین المللی
| IEC 60034-1 (2010) | Rotating electrical machines - Part 1: Rating and performance |
درجه بندی و عملکرد |
2016 |
3772-1 |
IEC 60034-1:2010 is applicable to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349. Machines within the scope of this standard may also be subject to superseding, modifying or additional requirements in other publications, for example, IEC 60079 and IEC 60092. The changes with respect to the previous edition are as follows: - clarification of water coolant temperature, - recognition of IE code, - clarification of the term "tolerances". |
|
| 2 |
IEC 60034-2-2 (2010) |
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
تست راندمان | 2016 |
IEC 60034-2-2:2010 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods apply when full-load testing is not practical and result in a greater uncertainty. |
|
| 3 |
IEC 60034-2-1 (2014) |
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
تست راندمان |
2018 |
IEC 60034-2-1:2014(B) is intended to establish methods of determining efficiencies from tests, and also to specify methods of obtaining specific losses. This standard applies to d.c. machines and to a.c. synchronous and induction machines of all sizes within the scope of IEC 60034-1. This new edition includes the following significant technical changes with respect to the previous edition: grouping of the test methods into preferred methods and methods for field or routine testing; addition of the details of the requirements regarding instrumentation; addition of the description of tests required for a specific method in the same sequence as requested for the performance of the test |